Connecting to the loop of SHIELD fire alarm system, BG-I450F Digital Manual Call Point (the MCP) is suitable for public places. When there is fire, pressing the action plate on the MCP can send the alarm signal to fire alarm control panel. After receiving the signal, the control panel will show address information of the MCP and generate alarm sound.
| Operating Voltage | Loop 24V (16V～28V) |
|---|---|
| Standby Current | ≤0.6mA |
| Alarm Current | ≤1.8mA |
| Indicator | Red. Flashes once three seconds. Illuminates after alarming. |
| Type of Initiating Part | Reusable |
| Initiating Mode | Pressing the action plate manually |
| Resuming Mode | Manually resumed by a special key |
| Programming Mode | Electronically addressed |
| Code Range | One address within 1～242 |
| Wiring | Two-wire, polarity-insensitive |
| Class | Type A, indoor use |
| Ingress Protection Rating | IP43 |
| Ambient Temperature | -10°C～+55°C |
| Relative Humidity | ≤95%, non condensing |
| Material of Enclosure | ABS |
| Dimension (L×W×H) | 87.1mm×87.1mm×58mm (with back box) 87.1mm×87.1mm×23mm (without back box) |
| Mounting Hole Distance | 60mm |
| Weight | About 160g (with back box) About 107g (without back box) |
