The SHX-200 Voice Evacuation System operates with any Fire Alarm Panel (FACP), and provides 200 Watts of speaker power.
The System includes all necessary features to provide an effective voice evacuation system. With the addition of zone splitters, remote microphone panels, and expander modules, the system can be custom configured to satisfied the needs of most applications.
The System has its own power supply and battery charger. Panel must be wired with 220 VAC and standby batteries connected.
A digital message repeater (DMR) is built into the system. The selection of alarm tone and automatic message repeats, as well as the 6 hour delay of the AC power failure reporting feature are all field configurable.
The paging microphone is an integral component. Removal of the microphone from the panel will cause a “Trouble” condition which will be reported locally, as well as through the FACP.
The system is housed in an attractive surface or semi-flush mounted backbox, with a hinge and key locked door.
| Primary Power | 220VAC @ 0.8A |
|---|---|
| 24 VDC Battery Power | 0.18A Standby 1.00A Alarm |
| Output | 200 Watts @ 25/70 VRMS Tone and Voice |
| Backbox Dim (w x h x d) | 14.5 x 18 x 4“ |
| Color | Charcoal Grey – standard Red – optional |
- Clean Dead-front Construction
- Digitally Recorded Automatic Evacuation Message (Up to 4 Minutes of Message Capacity)
- 200 Watt Bullet-Proof Amplifier
- 25 or 70 VRMS Field Selectable
- 220 VAC Power Supply and Battery Charger
- Live Microphone Override of Message and Tone
- Analog Addressable Compatible
- High Reliability, No Maintenance, Fully Supervised
- Easy Installation and Operation
- Studio Quality Voice Recordings
- Built in Alarm and Alert Signals
- Up to 4 Minute Message Capacity
- Works with 12VDC or 24VDC Fire Alarm Panels
- Works with Microprocessor based and Networked Fire Alarm Systems
- 3 Minute Message Restart on Microphone Key
- 24 Hour Backup with two 12V 7AHr Batteries
- Made in the USA.
